Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-169003.png)
Oil inspection plug
7. Start the engine.
*
Press the brake pedal
*
Shift the gear lever slowly through P-R-N-D three times
8. Read out the ATF temperature using PIWIS Tester II 9818 until the temperature is -> Temperature: 40 degrees C + 5 degrees C.
Menu structure:
8.1.Select PDK (Porsche Double Clutch) control unit
8.2.Submenu: Actual values/Input signals
8.3.Submenu: CAN output signals for transmission sump temperature
9. Move selector lever to position P.
10. Switch off engine and wait for about 2 minutes.
11. Open the oil inspection plug -arrow-.
Oil inspection plug
12. Fill in oil using manual metering pump WE 1372 until oil overflows.
13. Screw in a new oil inspection plug -arrow-. -> Tightening torque: 35 Nm (26 ftlb.)
