Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-156001.png)
Heater Hose: Service and Repair
Removing and Installing Heat Exchanger Supply Hose
REMOVING AND INSTALLING HEAT EXCHANGER SUPPLY HOSE
Preliminary work
1. Remove cross panel.
2. Drain coolant.
Removing heat exchanger supply hose
INFORMATION: The heat exchanger connection must be closed off using a suitable stopper once the cooling water hose has been removed.
1. Remove heat exchanger supply hose.
1.1. Remove hose clamps -2- ( -arrow A- ).
1.2. Pull hose -1- off the heat exchanger supply connection piece and the cross panel connection piece -arrow B-.
