Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-599004.png)
9. Remove the power distributor (HSB).
Installing power distributor (HSB)
WARNING:
Incorrect handling of safety bolts
-
Danger of injury
-
Loss of torque
-
Always use new fastening screws and nuts following removal.
-
Observe specified tightening torques.
-
Carry out a visual inspection of all re-used parts.
1. Fit the fuse elements according to the wiring diagram and fit the marked connecting lines one after the other in the power distributor and secure
with the fastening nuts.
-
Tightening torque: 5 Nm (3.5 ftlb.)
