Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-614154.png)
1. Disconnect the battery.
Removing sub-part for rear right underbody
INFORMATION: When cutting the front wire harness, make sure there is enough length of cable left to join to the new lines.
1. Cut rear right wire harness in area -x-.
2. Make sure that all fastenings on the rear right wire harness in the battery box are disconnected.
3. Loosen screws -A- on the transverse strut at the exhaust system at the rear and remove transverse strut.
4. Loosen all five fastening points -A- for the sub-part for the right underbody.
