Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-614182.png)
5.1. Unscrew fastening nut -1- for cable duct.
5.2. Release cable duct -2- by pulling it -arrow- from the fixing clip.
INFORMATION: When cutting the front wire harness, make sure there is enough length of cable left to join to the new lines.
6. Cut front right wire harness in area -x-.
7. Make sure that all fastenings on the front right wire harness in the interior are released.
8. Loosen rubber sleeve -A- in the right wheel housing, remove it by pushing it towards the wheel housing and carefully remove the wire harness
