Panamera S (970) V8-4.8L (2010)
14. Make sure that all fastenings on the wire harness in the engine compartment at the right are released.
15. Carefully remove sub-part of front right wire harness from the engine compartment through the openings by pulling it towards the wheel housing.
16. Make sure that all fastenings on the wire harness in the front right wheel housing are released.
17. Remove entire sub-part of front right wire harness.
Installing sub-part of front right wire harness
1. Push front right wire harness from the wheel housing towards the interior with the help of another mechanic and fit rubber sleeve at the correct
position. The arrow -2- must be pointing to the marking -1- on the rubber sleeve.