Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-380001.png)
Manifold Pressure/Vacuum Sensor: Service and Repair
Removing And Installing Pressure Sensor
Technical values
Removing and installing pressure sensor
The intake pipe pressure sensor is at a central position on the intake-air distributor and is facing the plenum panel. Naturally aspirated engine -4- or
Turbo engine -4-.
1. Remove pressure sensor.
1.1. Pull off cable plug.
1.2. Remove screw.
1.3. Remove pressure sensor by levering and turning it slightly.
