Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-414002.png)
3. Release electric plug connection -a- and remove the fuel pump control unit.
Installing control unit for fuel pump
1. Connect electric plug connection to the fuel pump control unit until the connector engages securely.
2. Push the fuel pump control unit onto the mounting -inset- and secure with the two fastening nuts -1-. -> Tightening torque: 2.5 Nm (2 ftlb.)
Subsequent work
Subsequent work for control unit for fuel pump
1. Install centre heat protection panel. Ensure that the heat protection panel is not deformed.
2. Install the exhaust system.
