Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-318002.png)
1. Unscrew the two fastening screws -1-.
2. Loosen the fastening nut -2-.
3. Pull the holder forward in direction of travel and lift it up and out.
4. Release the latch on both connectors -1, 2- ( -a- ) and pull the two connectors off the DME control unit.
5. Unscrew the six fastening screws -3- on the holder and remove the holder from the DME control unit.
Installing DME control unit
1. Position the holder on the DME control unit and secure it with the fastening screws -3-.
2. Plug in both connectors -1, 2- on the DME control unit and close the latch -a-.
3. Secure DME control unit and holder.
