Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-21001.png)
Parking Brake Control Module: Service and Repair
Removing and Installing Control Unit For Electric Parking Brake
Removing and installing control unit for electric parking brake
Preliminary work
1. If the control unit for the electric parking brake has to be replaced, the values must be read out prior to removal using the 2nd generation PIWIS
Tester 9818.
2. Remove right C-pillar trim.
Removing control unit for electric parking brake
NOTICE
Voltage peaks
*
Risk of damage to load or to the control unit
-> Remove the ignition key and switch off load before disconnecting or removing load.
Arrangement of control unit for electric parking brake
1. Switch off ignition and remove remote control.
