Panamera S (970) V8-4.8L (2010)
Steering Column Control Module: Service and Repair
Removing and Installing ELV Control Unit
Removing and installing ELV control unit
Preliminary work
Preliminary work for ELV control unit
1. If a new control unit has to be installed, the values and codings must be read out using the 2nd generation PIWIS Tester 9818 prior to removing
the "old" ELV control unit.
2. Remove steering column.
Removing ELV control unit
NOTICE
Voltage peaks
*
Risk of damage to load or to the control unit
-> Remove the ignition key and switch off load before disconnecting or removing load.