Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-799005.png)
-
Replace damaged parts during removal.
-
Always position the airbag unit in such a way that the airbag opening is facing upwards.
-
If removed for an extended period, the airbag unit must be stored in a safe place.
-
Airbag units must not come into contact with grease, oil, detergents, liquids, or similar substances.
-
Do not expose airbag units to temperatures above 90°.
-
Do not remove the short-circuit spring on the plug-in contacts.
-
Ignition and preparations may only be carried out by skilled staff, supervised by a second responsible person.
-
Before disposal, the airbag unit must be rendered harmless by electrical ignition performed in accordance with all precautionary measures, thereby
preventing it from being used incorrectly.
INFORMATION:
Only ignite airbag units that are securely installed in the vehicle and in the original condition. Allow airbag units to cool down under observation
following ignition.
-
Use only the ignition tool intended for this purpose. First remove all loose objects from the expansion area of the airbag.
-
Every ignition circuit for all airbag units and seat-belt tensioners must be ignited individually.
-
Persons possibly affected must be informed of the resulting noise beforehand.
-
Wear ear protectors.
-
Keep a safe distance by utilising the entire cable length of the ignition tool. Do not connect the voltage source until all other preparations are
complete.
-
If ignition fails, wait for approx. 3 minutes before approaching the vehicle.
-
Carry out ignition only in suitable, open areas.
-
Avoid skin contact with ignited airbag units.
1. Remove steering column trim.
2. Disconnect connector from the airbag on the steering-column switch and first plug in the connector -B- - 1st stage - from the adapter cable 9257/4.
3. Connect the ignition device 9257 to the 2-pin connector -E- of the adapter cable 9257/4.
4. Place the ignition device in front of the vehicle through the door gap.
5. After triggering, repeat the work step with the connector -C- - 2nd stage.
Passenger's side
