Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-812004.png)
2.3.3. Unscrew the M5 x 16 screws ( -item A2- ) with the self-locking nuts ( -item A3- ) on both sides.
2.3.4. Remove the bar ( -item A1- ) from behind.
2.4. Re-install inner and outer backrest cover on the driver's seat.
INFORMATION:
-
The retaining clips will be damaged irreparably during removal.
-
Always use new retaining clips during installation.
2.4.1. Fit and engage the cover ( -item 1- ) together with the retaining clip ( -item 2- ).
2.4.2. Fit the fastening screw ( -item 1- ) at the bottom and side of the cover ( -item 2- ).
2.4.3. Fit a new ring clip ( -item 1- ).
