Panamera S (970) V8-4.8L (2010)
2.3. Insert a solid plastic wedge behind the trim -1- from above and release the trim -arrow A- .
2.4. Press off the trim -arrow B- . Reach through the cut-out from the underside and loosen the locking mechanism -3- .
3. Disconnect the battery.
Removing front three-point belt
WARNING:
Incorrect handling of seat-belt pretensioner unit
-
Triggering of seat-belt pretensioner unit
-
Observe safety regulations for handling seat-belt pretensioner units.
-
Observe disposal regulations for seat-belt pretensioner units.
-
After disconnecting the battery, wait 1 minute before disconnecting the seat-belt pretensioner unit.
-
Remove ignition key and disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier is avoided.
-
If removed for an extended period, the seat-belt pretensioner unit must be stored in a safe place.
-
Transport the seat-belt pretensioner unit in such a way that the seat belt can retract safely if it is actuated.
1. Unlock retaining clip on the seat belt mount using a suitable screwdriver -arrow A- .
2. Push seat belt mount over the retaining pin -arrow B- until the lug under the retaining pin loosens the clip.