Panamera S (970) V8-4.8L (2010)
4. Turn the belt lug -arrow C- and slide it through behind the retaining bar in an upward direction -arrow D-
INFORMATION: When routing the electric wires, ensure that they are not routed through the belt-coiling area.
5. Secure the belt lug to the height adjustment device with the fastening screw -1- ( -arrow- ).
-
Tightening torque: 50 Nm (37 ftlb.)
INFORMATION: When routing the electric wires, ensure that they are not routed through the belt-coiling area.
6. Plug in electric plug connection -1- ( -arrow A- ) and close the locking mechanism -arrow b- .
7. Press the seat belt mount towards the seat -arrow A- and fit it on the retaining pin.
8. Pull the seat belt mount upwards -arrow B- until the retaining clip locks with an audible click.
Subsequent work
1. Fit trim panel on the belt fastening point at the front seat.