Panamera S (970) V8-4.8L (2010)
INFORMATION: The fastening screws for the adjustment fitting support plate must be replaced following removal for safety reasons.
1. Secure adjustment fitting support plate to the body with fastening screws -1- .
-
Tightening torque: 4.5 Nm (3 ftlb.)
INFORMATION: Once you tighten the fastening screw, the deflection lug must level out on its own in a vertical position or in the direction in which
it is worn.
2. Screw in fastening screw -1- on deflector fitting at the B-pillar.
-
Tightening torque: 50 Nm (37 ftlb.)
Subsequent work
1. Install B-pillar trim.