Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-81003.png)
Centering combination sensor
4. Tighten the fastening screws -1-.
-> Tightening torque: 10 Nm (7.5 ftlb.)±1 Nm (±0.5 ftlb.)
5. Plug in the electric connector until it engages securely.
Plugging in electric connector
Subsequent work
Information
Calibrate the vehicle after installing or replacing the combination sensor.
*
Calibration must only be performed with the vehicle >> standing horizontally with the brakes off <<.
1. Install air guide.
2. Calibrate the combination sensor (includes lateral and axial acceleration sensor) with the help of 2nd generation PIWIS Tester 9818.
To do this, go to the menu:
> Control unit overview
> PSM
> Maintenance/repair
> Sensor cluster calibration
This completes the calibration.
