Panamera S (970) V8-4.8L (2010)
Oil level sensor
2. Loosen the fastening screws and pull the oil level sensor out of the oil guide housing. Oil will start to drip.
Fastening screws
3. Replace sealing ring for oil level sensor.
Installing oil level sensor
Information
The tightening specifications for the basic engine are stored centrally. Tightening torques and assembly instructions for other affected assemblies (e.g.
chassis, electrics, transmission or body) or for peripheral engine equipment can be found in the corresponding documents.
Oil guide housing with accessories
1 - Screw, M6 x 20
2 - Sealing flange
3 - Sealing ring
4 - Oil guide housing to lower part of crankcase - aluminum screw; replace aluminum screws
5 - Oil level sensor
6 - Oil level sensor to oil guide housing (steel screw)