Panamera S (970) V8-4.8L (2010)
Pressing in:
Pressure pieces for bearing 2 - pressing in
*
T10230/2 - -1-
*
T10230/10 - -2-
*
T10230/12 - -3-
*
Washer - -4-
*
Nut - -5-
Information
When using the pressure pieces, the direction arrow shows the direction for pressing the rubber-metal mounts in or out on the trailing arm.
Arrangement of tools for pressing in bearing 2
The slit for the bearing must be positioned opposite the recess.
Installation position of bearing 2 (spring-strut mount)
4. The following pressure pieces and nuts are required for bearing -1-: