Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-686003.png)
Unhooking level sensor
7. Remove the two outer top control arms (toe, camber).
8. Get a second person to help when removing the front control arm at the wheel bearing housing (wheel carrier may tip outwards).
9. Left side: Brake off plastic protective ring -1- using a screwdriver.
Breaking off plastic protective ring
10. Prise the drive shaft, using 2 mounting levers for example, out of the rear-axle transmission housing.
Positioning mounting levers
11. Loosen the lower control arm -2- at the mounting -1- and take out the wheel bearing housing with the drive shaft (get a second mechanic to help
with this!).
