Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-718001.png)
Suspension Control Module: Service and Repair
Removing and Installing Control Unit For PDCC
Removing and installing control unit for PDCC
Preliminary work
Preliminary work for PDCC control unit
1. If a new control unit has to be installed, the values/coding must be read out using the 2nd generation PIWIS Tester 9818 prior to removing the
"old" PDCC control unit.
2. Detach part of the side trim panel for the rear luggage compartment at the left and fold it forward.
Removing control unit for PDCC
NOTICE
Voltage peaks
*
Risk of damage to load or to the control unit
-> Remove the ignition key and switch off load before disconnecting or removing load.
