Panamera S (970) V8-4.8L (2010)
Disconnecting PASM connector
2. Carefully pull off the PASM connector -arrow-.
Raising wheel carrier, front axle shown
3. Raise wheel carrier a little using a suitable lever. Use rubber base. Do not damage the brake cover plate.
Information
Pay attention to the displacement path of the level sensor if the lever is removed while removing and installing the vibration damper. The level sensor
may be damaged.
*
Unhook linkage of level sensor if necessary.
4. Carefully remove the lower threaded joint (connecting link) -arrows-.
Lower damper mount