Panamera S (970) V8-4.8L (2010)
Tire Pressure Module: Service and Repair
Removing and Installing Tire Pressure Monitoring System Control Unit
Removing and installing tire pressure monitoring system control unit
Preliminary work
Preliminary work for tire pressure monitoring system (TPM) control unit
1. If a new control unit has to be installed, the values/coding must be read out using the 2nd generation PIWIS Tester 9818 prior to removing the
"old" DME control unit.
2. Detach part of the rear side trim panel at the right.
Removing tire pressure monitoring system (RDK) control unit
Removing tire pressure monitoring system (TPM) control unit
NOTICE
Voltage peaks
*
Risk of damage to load or to the control unit
-> Remove the ignition key and switch off load before disconnecting or removing load.