Panamera S (970) V8-4.8L (2010)
1. Release, open and disengage the retaining bar -a-.
Removing control unit
2. Press locking lugs on the PDK control unit to the side and unclip the PDK control unit out of the holder.
3. Release -a-, open -A- and pull off -B- the connector.
Releasing connector
Installing transmission control unit (PDK)
1. Push electric connector onto the PDK control unit and lock connector.
2. Insert PDK control unit into the holder and secure using the retaining bar.
Installing PDK control unit
Subsequent work
Subsequent work for transmission control unit (PDK)