Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-448003.png)
Removing ATF pan
WARNING
Hot fluid
*
Danger of scalding
-> Let the fluid cool down.
-> Wear personal protective gear.
Information
Make sure to use steel screws when fitting the ATF pan.
1. Place a drip pan underneath.
2. Open the oil drain plug and drain oil.
Oil drain plug for PDK
3. Remove heat protection on the transmission.
Heat protection panel for PDK wiring harness
4. Remove heat shield on the transmission.
Heat shield on transmission
5. Unscrew fastening screws securing ATF pan to transmission.
