Panamera S (970) V8-4.8L (2010)
Centering ram on wheel bearing
Removing ball-joint bearing
Tools for pressing out ball-joint bearing, 1 - pressure plate 402, 2 - small ram
7. Place the wheel bearing housing onto the pressure plate 402 in such a way that the cut-out -arrows- does not cover the bore for the ball-joint
bearing. Get a second worker to hold the wheel bearing housing.
Pressing out ball-joint bearing, bearing bore not covered
Screw the small ram into the workshop press. Carefully press out the ball-joint bearing -2- (bearing drops out) -direction arrow-.