Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-485004.png)
Operating cable connection to transmission
10. Remove gearshift bracket together with operating cables.
11. Align gearshift bracket in neutral position using locking bridge 9619/2.
Aligning gearshift bracket
12. Measure excess operating cable -X- at the cable end and write it down. The dimension -X- is needed for pre-positioning when installing.
Measurement of excess operating cable
13. Unscrew fastening screws -arrows- from the bottom of the gearshift bracket and remove cover.
