Panamera S (970) V8-4.8L (2010)
/v8-4.8l/Page-485008.png)
Operating cable connection to transmission
10. Check position of clips using mirror.
11. Press gearshift bracket into the cut-out in the cardan tunnel.
12. Screw in fastening screws for transmission support. -> Tightening torque: 65 Nm (48 ftlb.)
Transmission support to body
13. Tighten fastening screws -arrows- for gearshift bracket to cardan tunnel. -> Tightening torque: 6 Nm (4.5 ftlb.)
Mounting of gearshift bracket
14. Release adjuster -arrows-.
