Panamera Turbo (970) V8-4.8L Turbo (2011)
Bodyshell areas are shown in the Technical Information.
NOTE:
-
The sealing material for seam sealing
-
Abbreviation: Seal
-
Part Number: 000 004 320 438 must be purchased from the Porsche Parts Service.
Procedure for seam sealing
To seal seams:
1. Apply sealing material directly to the accessory coated with KTL paint.
2. Allow the seam seals to harden for approx. 4 to 5 hours at 20° C and 50% relative air humidity.
NOTE: The hardening process can be accelerated by increasing the air humidity or by moistening the seal with water.
3. Press gently into the hardened sealant using your fingernail (nail test). If this causes no damage to the surface of the sealant, the sealant is
hardened.
4. Paint the seam seal.
Illustration of the seam seal areas
NOTE: See illustration of the seam seal areas in the Workshop Manual for the relevant Porsche model.
3.4.2.1 Porsche 986 seam seal
Front lid
Doors