Alliance/Encore L4-1721cc 105 CID (1985)
Wide Open Throttle (WOT) Switch: Adjustments
Bosch LU Electronic Fuel Injection
Refer to ``Inline 4 Cylinder Engine Tune Up'' for ignition timing, idle speed and idle air/fuel mixture adjustments.
THROTTLE POSITION SWITCH
1.
On Alliance and Encore models, remove throttle body to gain access to attaching screws.
2.
On all models, loosen switch attaching screws.
3.
With throttle plate against stop, slowly rotate throttle position switch in direction of throttle plate opening until inner stop can be felt.
4.
Tighten two attaching screws.
5.
On Alliance and Encore models, install throttle body.