9-2X F4-2.0L Turbo (2005)
11. Remove the under cover.
12. Drain the engine oil.
13. Remove the front exhaust pipe assembly.
14. Remove the nuts which install the front cushion rubber onto front crossmember.
15. Remove the bolts which install the oil pan on cylinder block while raising up engine.
16. Insert the oil pan cutter blade between cylinder block-to-oil pan clearance.
CAUTION: Do not use a screwdriver or similar tool in place of oil pan cutter.
17. Remove the oil strainer.
18. Remove the baffle plate.
Installation
CAUTION: Before installing the oil pan, clean sealant from oil pan and engine block.
1. Check the seal (A) is securely installed in baffle plate in the direction as shown in the figure.