9-2X F4-2.5L (2006)
INSTALLATION
Install in the reverse order of removal.
Important:
^
If the cable clamp is damaged, replace it with a new one.
^
Never fail to cover the outer cable end with boot.
^
Be careful not to kink the accelerator cable.
^
Always use new clevis pins.
Adjust the clutch pedal
Inspect the brake pedal after installation
DISASSEMBLY
MT MODEL
Remove the brake switch.
Remove the clutch pedal.
Remove the clutch master cylinder bracket.
Remove the bushing, spring and stopper.
(1) Stopper
(2) Bushing
(3) Brake pedal
(4) Brake pedal spring
Remove the brake pedal pad.
AT MODEL
Remove the brake switch.
Unbolt, and then remove the brake pedal.
