9-2X F4-2.5L (2006)
ASSEMBLY
Apply recommended brake fluid to the inside wall of cylinder, and to outer surface of the piston assembly.
Ensure that the inside wall of cylinder, and piston assembly are free from dirt when assembling. Install the primary piston assembly and secondary
piston assembly, while taking care not to damage, scratch, or dent the cylinder inside wall, and piston assembly.
Install the cylinder pin while pushing in primary piston by screwdriver which wrapped with tape.
Install the piston retainer, and then secure it by pressing the pawl.
Install the seal to reservoir tank.
(1) Seal
Install the reservoir tank to master cylinder and secure with pin.
