9-2X F4-2.5L (2006)
(1) Nuts
(2) Clevis pin
(3) Snap pin
(4) Operating rod
Connect the vacuum hose to brake booster.
Mount the master cylinder onto brake booster.
Connect the brake pipes to master cylinder.
Connect the electric connector for brake fluid level indicator.
Measure the clearance between threaded end of stop light switch and stopper. If it is not within specified value, adjust it by adjusting the position of
stop light switch.
If it is not within specified value, adjust it by adjusting the position of stop light switch.
Important: Be careful not to rotate the stop light switch.
Stop light switch clearance A: 0.3 mm (0.012 inch)