9-2X F4-2.5L (2006)
6. Install the under cover.
7. Tighten the bolts which install the front and center exhaust pipe assembly to rear exhaust pipe.
^
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
8. Tighten the bolt which holds the front and center exhaust pipe assembly to hanger bracket.
^
Tightening torque: 35 Nm (3.6 kgf-m, 26.0 ft. lbs.)
9. Lower the vehicle.
10. Connect the front oxygen (A/F) sensor connector (A) and rear oxygen sensor connector (B).
11. Connect the ground cable to battery.
