9-2X F4-2.5L (2006)
Tightening torque: 7.4 Nm (0.75 kgf-m, 5.4 ft. lbs.)
Tighten the joint nut.
Tightening torque: 15 Nm (1.5 kgf-m, 10.8 ft. lbs.)
Connect the pipes A and B to four pipe joints of gearbox. Connect the upper pipe B first, and lower pipe A second.
Tightening torque:
Saab 9-2X 2.51 Linear: 13 Nm (1.3 kgf-m, 9.4 ft. lbs.)
Saab 9-2X 2.0T Aero:
Housing side: 20 Nm (2.0 kgf-m, 14.5 ft. lbs.)
Cylinder side: 24 Nm (2.4 kgf-m, 17.4 ft. lbs.)
Install the jack-up plate.
Install the air intake duct.
Install the air intake duct, air cleaner upper cover and air intake boot.
and
Connect the battery ground cable to battery.
Feed the specified fluid.
Important: Never start the engine before feeding the fluid; otherwise vane pump might be seized up.
Finally check clearance between pipes and/or hoses, as shown above.
If cruise control actuator-to-power steering hose clearance is less than 10 mm (0.39 inch), move the portion (A) secured by clamp to other portion, or
bend portion (B) to adjust.
