9-2X F4-2.5L (2006)
Set balancing (dynamic balancing for stick-on balance weight is available) and measure wheel balance.
Select a weight close to the calculated value, clean the point designated by balancing and paste on the weight there.
Important:
^
Press on the weight for more than 2 seconds with a force of 25 Nm (2.6 kgf-m, 18 ft. lbs.) or more per 5 g to paste on.
^
Adjust weight balance from outside first and then inside.
^
The weight to be pasted on must be under 100 g.
INSPECTION
Proper wheel balance may be lost if the tire is repaired or if it wears. Check the tire for dynamic balance, and repair as necessary.
To check for dynamic balance, use a dynamic balancer. Drive in the balance weight on both the top and rear sides of the rim.
Some types of balancer can cause damage to the wheel. Use an appropriate balancer when adjusting the wheel balance.
Use genuine balance weights.
Service limit A:
5 g (0.18 oz) - 25 g (0.88 oz) 5.0 mm (0.20 inch)
30 g (1.06 oz) or more 4.5 mm (0.177 inch)
