9-2X F4-2.5L (2006)
3. Remove the spark plug cords by pulling the boot. (Do not pull the cord itself.)
4. Remove the spark plug with a spark plug socket.
2. LH SIDE
1. Remove the battery.
2. Remove the spark plug cords by pulling the boot. (Do not pull the cord itself.)
3. Remove the spark plug with a spark plug socket.
INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
Tightening torque: 21 Nm (2.1 kgf-m, 15.2 ft. lbs.)
NOTE: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque
should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing.
2. LH SIDE
Install in the reverse order of removal.
Tightening torque: 21 Nm (2.1 kgf-m, 15.2 ft. lbs.)
NOTE: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque
should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing.