saab Workshop Repair Guides

Saab Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Ignition Shut Down Relay (For Antitheft): Testing and Inspection

INSPECTION

Measure the interrupt relay resistance between terminals (indicated in the table below) when connecting terminal No.3 to battery positive terminal and
terminal No.1 to battery ground terminal.

If NG, replace the interrupt relay.

IMPORTANT:  Do not connect the terminals to battery positive terminal and ground terminal incorrectly. If this happens, replace the
interrupt relay.

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Ignition Shut Down Relay (For Antitheft) > Component Information > Testing and Inspection

< PREV PAGE NEXT PAGE >