saab Workshop Repair Guides

Saab Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Control Module: Service and Repair

Transmission Control Module (TCM) 

REMOVAL 

1. Disconnect the ground cable from battery.
2. Remove the lower cover and then disconnect the connector.
3. Remove the knee bolster.

4. Disconnect the connectors from TCM.

5. Remove the TCM.

INSTALLATION 

1. Install the TCM.

2. Connect the connectors to TCM.
3. Install in the reverse order of removal.
4. If replacing the TCM, execute the advance operation of learning control promotion. 

Relays and Modules > Relays and Modules - Transmission and Drivetrain > Relays and Modules - A/T > Control Module, A/T > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >