9-2X F4-2.5L (2006)
Fuel Gauge Sender: Service and Repair
Fuel Sub Level Sensor
Fuel Sub Level Sensor
REMOVAL
WARNING:
-
Place "NO FIRE" signs near the working area.
-
Be careful not to spill the fuel.
1. Disconnect the ground cable from battery.
2. Lift up the vehicle.
3. Drain the fuel from the fuel tank.
4. Remove the rear seat.
5. Remove the service hole cover.
6. Disconnect the connector from the fuel sub level sensor.
7. Disconnect the fuel jet pump hose.
