saab Workshop Repair Guides

Saab Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Transmission Position Switch/Sensor: Adjustments

Inhibitor Switch 

ADJUSTMENT 

1. Move the select lever to "N" range.
2. Loosen the three inhibitor switch securing bolts.
3. Insert the ST as vertical as possible into the holes in inhibitor switch lever and switch body.
ST 499267300 STOPPER PIN

4. Tighten the three inhibitor switch bolts.
Tightening torque: 

3.5 Nm (0.36 kgf-m, 2.6 ft. lbs.) 

5. Repeat the above checks. If the inhibitor switch is determined to be "faulty", replace it.

Transmission and Drivetrain > Transmission Control Systems > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Adjustments

< PREV PAGE NEXT PAGE >