9-3 (9440) L4-2.0L Turbo (2007)
Procedure, LHD
Procedure, LHD
1. Remove the audio/navigation unit, see WIS - 3. Electrical system - Head unit, audio/audio with navigation, Adjustment/Replacement.
2. Remove the glove box, see WIS - 8. Body - Interior equipment - Adjustment/Replacement.
3. Remove the scuff plate (A) and the lower cover (B) on the right-hand side.
4. Route the new wiring harness up to the audio/navigation unit along the existing panel harness.
5. Unplug the connector H33-4 (A) and expose the wiring harness by cutting the cable tie (B) to the clip.
6. Replace the wiring harness in connector H33-4. Make sure that the new pins are in the correct position:
-
Extract the connections 20 - 28 in connector H33-4.