9-3 (9440) L4-2.0L Turbo (2007)
5. Unplug the connector H33-4 (A) and expose the wiring harness by cutting the cable tie (B) to the clip.
6. Replace the wiring harness in connector H33-4. Make sure that the new pins are in the correct position:
-
Extract the connections 20 - 28 in connector H33-4.
-
Cut off the pins, fold the cables back and tape them together with the wiring harness.
-
Connect wiring harness (12783014) to H33-4. Connect in accordance with the following: