9-3 (9440) L4-2.0L Turbo (2007)
-
Secure with cable ties to the normal cable harness (A).
-
Remove the tape (B) on the protective hoses and route the wiring harness through the hoses (B). Check that the correct cables are routed
through the relevant hose.
9. Replace the wiring harness to the audio/navigation unit. Make sure that the new pins are in the correct position:
-
Remove the secondary catch in connectors K14 and K16.
-
Extract the connections 2, 3, 9, 10, 11 in connector K14.