saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Trailer Connector > < Diagram Information and Instructions|Page 14633
Page 2
background image

Alternative 2

Make an adapter harness with a 7-pin female contact for connection to the trailer's connector at one end and a 13-pin male contact for connection to the
car's connector at the other end. The connectors are connected together as follows:

IMPORTANT:  A rear fog lamp (if fitted) cannot be used on the trailer. If connected to pin 9, the car's battery could be drained if the trailer is
connected to the car and the car is not driven.

7-pin female contact, pin no.

13-pin male contact, pin no.

1 (Direction indicators L)

1

2 (Extra power consumers)

9
(constant power supply, max. current 20 A) or
10 (power supplied via car's ignition switch, max. current 30 A)

3 (Ground)

3

4 (Direction indicators R)

4

5 (Exterior light R)

5

6 (Brake lights)

6

7 (Exterior light L)

7

Fault diagnosis procedure is not available.

Trailer Connector > < Diagram Information and Instructions|Page 14633