9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-3613006.png)
13.B. Pull downwards to get out the handle counterweight.
13.C. Now lift upwards to get the handle's rod out through the hole.
To fit
1. Check the handle's gasket so that it is in one piece and located correctly.
2. Fit the handle by:
2.A. Fit the handle rod in the door.
2.B. Angle in the handle's counterweight.
2.C. Angle in the handle's lower edge and insert the studs in the holes.
