9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-3773048.png)
3. Insert the middle bolster fastener into its catch.
4. Fit the side bolster by pressing on the inner bolster clips.
5. Cars with cable tie: Fit a new cable tie.
Cars with clips: Fit the clip.
6. Check that the belt is positioned correctly and not twisted.
7. Fit the C-pillar trim.
Side Bolster, 5D
Side Bolster, 5D
To remove
1. Remove C-pillar trim, 5D.
2. Remove the clip using 82 93 474 Removal tool.
