9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-3994003.png)
8. Remove the clip for the hydraulic cylinder piston rod.
9. Unhook the wire clip from the fastening pin.
10. Pull out the fastening pin for the hydraulic cylinder.
11. Place some paper under the hydraulic cylinder to catch any hydraulic fluid that may run out. Take the hydraulic cylinder out of the holder so that it
is easier to access the hydraulic line connections.
12. Remove the hydraulic line retaining clips by pulling them out.
