9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-3996003.png)
5. Remove the fastening pin for the hydraulic cylinder piston rod.
6. Remove the fastening pin clip for the hydraulic cylinder.
7. Remove the fastening pin for the hydraulic cylinder. Observe the accompanying washers.
8. Pull out the hydraulic cylinder somewhat to facilitate access to the hydraulic line connections. Place some paper under the hydraulic unit to catch
any hydraulic fluid that may run out.
9. Open the hydraulic line retaining clips by pulling them out.
